Compound Molykote
111
Description
Silicone-based compound, heavy consistency.
Operating temperatures
-40°C +204°C
Pre-packing
6g100g400g1kg5kg25kg200kg
- Applications
- Friction units
- Advantages
- Problems to be solved with this material
- Related videos
- Recommended by manufacturers
- The combination of materials
- Features
Applications
FEATURESWide service temperature range (-40°C/-40°F to 200°C/392°F)
Excellent water resistance
Compatible with many plastics and elastomers
Low vapor pressure
Low volatility
Meets several global standards for water contact
APPLICATIONS
Lubrication for control and pressure plug valves, water softener and faucet valves.
Sealant for vacuum and pressure systems.
Sealant for outdoor equipment (also shipboard) subject to washing and harsh environmental exposure: meters, electrical service entrance and underground connections.
Damping medium for dash pots in electrical and electronic equipment.
Used as an anti-stick and a sealant for transformer gasket and equipment enclosures. It prevents gaskets from sticking to metal and resists weathering and water washout.
Rubber and plastic O-rings, gaskets and seals.
It is used in friction
Gaskets
Electrical contacts
Advantages
- Cold resistance
- Termal (heat) resistance
- Chemical resistance
- Working capacity in vacuum
- Working capacity in moisture
- Listed under NSF Standard 51 for use in food processing equipment
- WRAS approved (to be used in drinkable water supply systems)
- DVGW approved (to be used in gas supply system equipment)
- Listed under NSF Standard 61 for use in potable water applications
- Good anticorrosion properties (good corrosion protection)
- Good water washout resistance
- High dielectric strength
- No drop point
- Compatible with many plastics
- Compatible with many elastomers
- Easy mounting / dismounting
Problems to be solved with this material
- Details sticking after technological operations (pressure forming, molding, etc...)
- Corrosion
- Lubricant wash-out
- Lubricant destruction of chemically active medium exposure
- Lubricant efficiency loss in vacuum
- Electrical breakdown
- Frequent re-lubrication
- Difficult mounting / dismounting
- Plastic and elastomer details deformation and destruction
Related videos
Recommended by manufacturers
- ALFA LAVAL
- Areva
- Avdel
- AVK
- Baxi
- BMW Motorrad AG
- Bosch Security Systems
- BRP-Rotax GmbH
- BSA Guns
- De Dietrich
- Dräger Safety AG & Co.
- Dynameters
- ETTEM ENGINEERING
- Flowserve
- Geolink
- Goat throat
- Habonim (Compact4)
- Honda
- Hydrobond Engineering
- Jeep
- KSB
- Leica
- Lumascape
- Marin
- Maxwell
- Nikon
- Phoenix contact
- Thompson valves
- Tyco
- Waikato
- Westen
Material combination in friction pair
- Metal - Metal
- Metal - Plastic
- Metal - Elastomer
- Plastic - Plastic
- Plastic - Elastomer
| Стандарт | Показатель | Ед. изм. | Значение |
|---|---|---|---|
| — | Цвет | Белый, полупрозрачный | |
| — | Базовое масло | Метилсиликоновое | |
| — | Загуститель | Неорганический загуститель | |
| — | Присадки | Присадки | |
| — | Диапазон рабочих температур | °С | от -40 до +204 |
| DIN ISO 2137 | Пенетрация неперемешанной смазки | мм/10 | 170…230 |
| DIN ISO 2137 | Пенетрация перемешанной смазки (60 циклов) | мм/10 | 260 |
| — | Класс консистенции по NLGI | 2…3 | |
| — | Температура плавления | °С | Нет |
| — | Плотность при 25 °С | г/см3 | 1,0 |
| — | Диэлектрическая проницаемость при 100 Гц/100 кГц | 2,88/2,95 | |
| — | Диэлектрические потери при 100 Гц/100 кГц | 0,0001/<0,0005 | |
| — | Электрическая прочность диэлектрика при зазоре 1,27 мм | кВ/мм | >17,72 |
| — | Удельное сопротивление при 23 °С | Ом*см | 2,17 х 1015 |
| — | Дугостойкость | с | 124 |
| CTM 0033A | Потери на испарение (24 ч, 200 °C) | % | 2,0 |
| CTM 0033A | Выделение масла (24 ч, 200 °C) | % | 0,5 |
| — | Пищевой допуск: соответствие стандартам NSF/ANSI 51 (материалы для применения в оборудовании при производстве продуктов питания) и NSF/ANSI 61 (материалы для применения в системах питьевого водоснабжения) | NSF/ANSI 51, NSF/ANSI 61 | |
| — | Пищевой допуск: соответствие стандартам FDA 21 CFR (для материалов с возможностью случайного контакта с продуктами питания) | FDA 21 CFR 175.300 |